Elev8 Distribution Production Process and Guide

Elev8 Production Jobs

Daily tasks to stay ahead and deliver the best product quickly.

1. Take a look at the inventory for all prebuilt vapes.
   1. Setting up new tubes to keep the rotation moving and fully stocked
      1. Full welding
      2. Lighting
      3. Cording
      4.  Knobing
         1. Mix weld (as it needs to sit) and use with other production tasks
2. Take inventory for all glass and put in orders
   1. Wands
   2. Knobs
   3. Heater Covers
   4. Look at stock for Ballers
   5. Look at stock for all kits
3. Build orders as needed
4. Update stock as needed for all vaporizer production parts
5. Take care of all repairs, trade-ins and other tasks associated to this process
6. Take care of any production work that is outside of standard production to keep things moving and effecient.
7. Maintenance

Weekly Tasks To Stay 100%

1. Spot check ANY parts that are used in ANY production
   1. Inventory for Production
   2. Stock all kits
2. Gather any parts that can be done by the head shop and make sure all tools are available.

• How to use the eye washer

Building Elev8 Products

Silver Surfer Build

• 1. Cord Types
  2. Silver and Super Housing Types

1. Building the disc
   1. How to Tighten Tension Bar and Stand
2. Welding the disc in the housing & adding light
   1. How to properly Mix JB Weld
3. Cording the vapes
   1. How To Expand The Cord Hole For Older Housing
4. Testing Dimmers
5. Wiring the dimmer  and  adding  powercord
   1. How to install a dimmer video
6. Heater Assembly
7. How to make bases
8. Adding bases to the vapes
9. Adding the heater cover to the SSV
10. Welding Knobs
11. Testing
12. Serializing the Vaporizer
    1. Changing a serial number for Refurbished Elev8 Veteran Vapes
13. Screening Wands
14. Bagging
    1. Making Bags
15. Cutting Tubing or Hose for the whip

Wave Rider Silver Surfer Procedures

1. Laser Engraving the Surfer
2. Wave Rider Series Sublimation Process
3. Building the WRS
4. Sublimation Supplies

Super Surfer Build

1. 1. Wiring the Super Surfer
   2. Adding the knobs
   3. Drilling out the fan
   4. Putting together the disc
2. Changing Out from 110 to 220 volts

DBV Build

1. 1. Building the disc
   2. Welding the disc in the housing
   3. Adding the light and cord
   4. Testing Dimmers
   5. Wiring the dimmer  and  adding  powercord
   6. Adding bases to the vapes
   7. Adding the heater cover to the DBV
   8. Testing
   9. Serializing the Vaporizer
   10. Bagging
       1. Making Bags

SideKick Build

• • V1 build
  • V2 build
  • Laser Engraving the SideKick

Life Saber Build

Elev8r Build

1. 1. Full Kit
   2. Rig Kit
   3. Making the Elev8R Sick Clip

Building & Laser Engraving  Grinders

Printing Labels

1. Printing Labels for Products
2. Printing QR instruction labels

 

Putting on Decals

• • Running the kiln

Ordering More Glass Parts

Trunk Build

Stocking Glass For Production

Essential Oil Kit Build

• Building EOK Kits
  
• List of EOK parts

Vape Part Fixes

Baller Series Kit Build

1. Baller series kit
2. Baller series kit to be sold WITH THE VAPORIZER

• Sanding Images Off of Silver DBV Tubes(Void)
• How to ReWeld DBV Knobs

Unit Repairs

Repairs

Repairing Orders

• How to Tighten Tension Bar and Stand
• Dimmer Repair Video
• Dimmer Repair Kit Build
• Heater Repair Kit Build

 

• Testing Units for repair
  • SSV
  • DBV
  • SUP
  • LSV

 

• Changing out a heater stand and adding a restraint bar
• Drilling out knobs to reuse
• Tapping out a new screw hole
• How to ReCord a SSV and DBV Unit
• Replacing a power cord 220 volts
• Elev8 PID testing
• How to Re Weld Discs in SSV and DBV units
• Tools for repair
  
• Test the Unit
• Follow the Trello Card for the product in the Vapes repair trello board
  • You can learn more about how we use trello here

Trunk Production

Glass Clamp Tool

Inhouse Production

• Adding or updating an Q and A or Procedure

Bathbomb Procedure

Making Flat Tip Picks

Taking inventory with Elev8.one

All Glass Pathway Production