As we are not doctors we would not know this. But, at high temperatures metal does give off free radicals, as well as can degrade.
Brass is said to have no heath effects, but we could not find any info on steel, but feel steel melts at a much higher temperature, so it should be ass good.
We feel vaping reduces this concern as the temperatures are much lower than smoking
No. These are made for having a good time.
What makes banger work? Heat and having air go over the oils to pull the hot vaping oils from the banger or dish. The way a terp slurper works is that the air is coming from the bottom so the marble blocks air from not going over the oils. With this design, the oils move up and down the tube.
This is because the carb cap needs to make a whirlwind or vortex inside the banger. Carb caps for this have holes, slits or other notches in the carb cap to help the air spin.
You can clean a wooden pipe much like a glass pipe. Just make sure you will rinse it more as the wood can soak up some alcohol, and more importantly let it fully dry before use.
Alcohol and a pipe cleaner work great. You really do not want to get alcohol on the outside of the pipe though. It could dry out the wood and make it look bad. If you do get alcohol on the outside, it is a good idea to re-oil the wood to keep it lasting longer and from drying out the wood too much.
Many people find that these are rawer and less “shall we say processing” goes into them.
Why wash a backwoods?
Most American glass is based on the retail value of a good artist as about $100-$150 an hour. Based on the skillset and branding the artist has will set it at either a lower or higher level. This also includes insurance costs, health, product liability, commercial rent, commercial taxes and a lot of overhead. While this may seem high, one must look at other skilled trades, and we mean people that hold the skill very well, not a garage blower hacking away, but a blower that has put in 10’s of thousands of hours.
Electricians and plumbers run about $100-$200, depending on the skillset required.
Lawyers are around $250-$400 an hour.
What we need people to understand is that while a solid blower who may demand $150 an hour is not really making that much an hour. If they are small they make more, but as one grows, they need help, that help is paid from the profits of the blower. So if they make $150 an hour this could be a breakdown.
Blowers time 35%. So the blower would make about $52 after paying all these things below. Then what if the piece breaks??? The blower has to make it again? All costs are the same, but now his hour’s doubles, so he is now only at about $26 an hour. This is the battle a blower deals with.
Helpers time 20%
Accountants time 5%
Marketers time 10%
Insurance 5%
Taxes 5%
Rent 10%
Misc 10%
While we are sure there is some goodness in the “reclaim” from dabbing, we find it is not really the same as the ABV or what we call duff. The duff is full-spectrum and is really some of the best edibles. The reclaim I guess has been heated so it too has been decarboxylated, but like oils, it’s a mess.
We would say for sure give it a try with some food.
ah, well we feel making a rig is way harder. It does involve sculpting, but not like a character, but to keep the tubes round and clean. This is very hard actually.
Sculpting while hard, can be practiced with clay making the process easier. But making a rig can only be done when you make a rig.
CLEAN is hard
Well, these are not ice pinches. These are made so the joint can go on more easily. See the images below, and if that indent was not there, the joint could not go on cleanly.
