This can happen as it is so small that the blower can not tell it is there. You could not really see or feel this. This can happen when two pieces of glass are joined together badly. This can happen but a good blower will see the error and then fix it. Not that even …
Continue reading “How does a pinhole form or get left on the weld on a waterpipe?”
Actually the slit makes it easier to take your insert out of the banger
The newer versions have the screw together joint as this is what we need for CE certification. We feel JB weld actually is better, but the EU feels differntly.
We got these two colors are our first two colors as if you mix them you get a gold. This was a way Steve could be frugal and get 3 colors for the price of one.
This was our first step into powder coating and we LOVED the look. Then almost a week after we got it, we heard that Black and Gold were Willies’ best colors, so we paired it with a yellow base and he got one.
Add a little heat with the outer edge of torch to loosen up the oil keeping the tip stuck
The kinks allow you to lay your Zong down on it side without water coming out. It also makes the tube actually have more volume than a straight tube the same height.
Powder coating is using a dry powder to coat the metal. Powder coating is a very tough and durable coating. The powder sticks to the metal as the powder is charged – and the metal is charged +. This allows the powder to stick to the metal. The metal must be sandblasted, then cleaned in …
The easiest way we have found is to dip the tubing into some hot water, then fold the tubing and insert it into the wand. See our video