You can easily swap your knob. Carefully grab the knob with your thumb, pointer and middle finger and pull. It can help to use your fingers to push between the knob and housing as you pull, essentially prying the knob off.
Do not twist and pull, or you could twist the dimmer and break it.
This is not really known as people iind new ways all the time.
There are about 2 big ways
Compression
This all depends, it can be from an 80 grit to a 1000 grit. You must switch over and over to get it smoother.
Yes! Call (719) 301-0774 for more information about pricing and availability
Here is the page for studio rental
We feel that more diffusion is made with smaller holes. The smaller the holes, and the more of them, the more percolation there will be. One thing to note is if the holes are too small they will clog easily when doing dabs. Small holes are best for a person that is using a vaporizer as the vape keeps the rig clean.
More glass is the ultimate tool. A tungsten pick can be used for pushing a hole, and a graphite rod can help move the glass around. The best thing is to not let an error happen:)
A blow hose helps the blower pop a hole in the glass
You get to have fun making the water pipe how you want. If you want it taller, do it, if you want more percs, do it. This is for someone that loves to change their experience often.
using a lot of time. They use a thick vinyl to lay the images on the glass and then sandblast them or Graal them. It can take up to 30-60 minutes to cut deep into the glass. This is a type of cold working.
yep, anything like this is possible. It would give some good depth into the glass for sure. Many times a blower will layer dichro over color, but dichro can be lain on top of dichro for sure.
