Yes and no. The bigger the terp pearls, the harder they are to spin. The more oils in the dish, the hard to spin. But with a good spinner carb cap, you can get them to spin with a normal inhale.
The reality is anything you put in your lungs other than clean air is bad for you. Now, if a tool is bad or not comes down to really how it is used. You could use a silicone dab tool, but if you get it to 1000 degrees, it might not be good. If the …
He does all the work cold. He cuts the glass, polishes the glass, and then uses an epoxy to “weld” the glass together.
They are made much like a small marble, but with larger prep, more heat and more glass. The blower uses a marble mold to keep it round as they make it.
Because the way a dome and nail worked required it to be very hot. With the new way of doing low temp dabs we have found there is a better way. Also, clean up of a banger is easier than with a dome and nail.
A SideKick V1 heats up about 30 seconds faster do to the 7 volts compared to the 3.5 volts in the V2. But the V2 gets 0-10 uses while the V1 gets about 3 uses per charge. Average heat up time is about 1-1.5 minutes
Because under 18 you just can not make your own decisions in life. This is the law
Yes, with a hole it helps the terp pearl spin with only the need for a marble. The bottom should not have any effect on the spinning of the terp pearls.
This really comes down to you, the user. Some like it hot, some like it cool. 428 would be the perfect temperature that will get you full spectrum. At this temperature all the cannabinoids, flavonoids and terpenes are vaporizers. Learn more here.
Yes they do affect each other some. In some research it was found that caffeine and low THC seemed to hurt the working memory more than just THC on its own.