Can I use my big waterpipe for concentrates?

Absolutely! As long as your nail or banger fits correctly to your water pipe, you can do concentrates through it.  Many people prefer a small rig to fit into your hand.  Also, the more water and further your dab hit travels, the more it cools allowing the fats and lipids to cool down.  These are the yellow parts of go that start to float or get caught in the glass.  

 

What is a pollen press?

A pollen press, also referred to as a kief press is a device that takes your powdered trichomes and presses it into a solid form known as hash.

Once filled with kief, you can put in the oven at about 150 to help the hash get harder and more like hash.

Are different colors of borosilicate glass different to work with? (i.e. does one color play differently than the other as far as bending, temps, kiln time, etc.)

Yes.  Only clear is 33 COE.  Minerals are added to the glass to get it to change color.  When this happens the properties of the glass change.  This is part of the art of glass.  The blower must know how the color will work.  Also, the blower must also know what kind of flame atmosphere to use when working the color so it is not destroyed.

For instance Jet Black is one of the densest and hardest to get to melt.  If it is next to clear more heat has to be applied to the black to get it to flow like the clear.  Also, black can only be worked in an oxidizing flame or it

Some colors also need to sit in the kiln at a high temperature.  This can be to get the glass to strike, or to get the glass to be even so to speak.

How do I turn my G Pen Connect Battery on/off?

Make sure to charge the G Pen Connect Battery prior to use. Once the Connect is charged in full, press the power button five times. The button will blink three times to indicate it has been powered on. To power the device off, click the button five times again. The button will blink one time in each color (blue, green, red) to indicate it is powering down.

How do I cycle between my G Pen Connect’s temperature settings?

Once the Connect has been powered on, you can cycle through its three voltage output settings by simply clicking the power button three times. The G LED on the button will change color, indicating the voltage setting has been changed. The three voltage settings and their corresponding colors can be found below:

Low (Blue) – 3.1V

Medium (Green) – 3.6V

High (Red) – 4.1V

How do I activate my G Pen Connect’s extended draw mode?

Once the G Pen Connect is powered on, the Extended Draw Mode can be activated by clicking the button twice. The G LED on the button will begin blinking, indicating the Connect has begun heating. Once at temperature, the G LED will remain solid and continue to heat for 10 seconds without the need for holding the button down. This automatic heating can be canceled at any time by clicking the button.